Types of Dredges and Specified Machinery
Types of Dredges and Specified machinery that may be registered includes but are not limited to:
- River Dredge (varying suction diameter) - SDR
- Land Dredge (varying suction diameter) - SDL
- Cutter Head Dredge (varying suction diameter) - RSCH
- Hydraulic Excavator - SMHE
- Hammer Mill (H-2, H-3, etc.) - SMHM
- JAW Crusher - SMJC
- Wash Plant - SMWP
- Front End Loader - SMFEL
- Bulldozer - SMBLD
- Rod Mill - SMRM
- Metal Detector - MD
- Truck - SMTR
- Articulated Truck - SMAT
- Drill - SMDR
- Centrifugal Concentrator - SMCF
- Screen (vibratory or rotary) - SMSC
- Forklift - SMFL
- Crane - SMCR
- Shaking Table - SMST
- Jig - SMJG
- Impact Mill - SMIM
- Tractor - SMTRT
- Grader - SMGD
Registration Procedure
Applicants must schedule an appointment with the Mines Inspectorate Section of Mines Services Division for an inspection of the equipment. An inspecting officer would verify the engine/s serial numbers and record it onto prescribed forms. Thereafter, the supporting documentation would be collected in order to complete the registration process. Please contact our inspectorate Section on 225 6691 at Ext 266 or use our online service by clicking here to schedule the appointment.
Application for Registration of equipment with the Commission must be accompanied with the following documents:
- Copy of a form of Identification (National Identification Card or Passport)
- Copy of Taxpayer Identification Number Certificate (TIN)
- Proof of Address (Utility Bill)
- Appropriate fee
Fee Schedule
Registration fees and annual renewal cost:
Equipment |
Registration fee |
Application fee |
Annual licence and renewal fee |
Land/River/Cutter head Dredge |
$1,000 GYD |
$1,000 GYD |
$3,000 GYD |
Land/River/Cutter head Dredge – 4 inches |
$1,000 GYD |
$1,000 GYD |
$4,000 GYD |
Land/River/Cutter head Dredge – 5 inches |
$1,000 GYD |
$1,000 GYD |
$4,500 GYD |
Land/River/Cutter head Dredge – 6 inches |
$1,000 GYD |
$1,000 GYD |
$6,000 GYD |
Land/River/Cutter head Dredge – 8 inches |
$1,000 GYD |
$1,000 GYD |
$8,000 GYD |
Land/River/Cutter head Dredge –10 inches |
$1,000 GYD |
$1,000 GYD |
$10,500 GYD |
Land/River/Cutter head Dredge – 12 inches |
$1,000 GYD |
$1,000 GYD |
$15,500 GYD |
Land/River/Cutter head Dredge – 14 inches |
$1,000 GYD |
$1,000 GYD |
$24,800 GYD |
Land/River/Cutter head Dredge – 16 inches |
$1,000 GYD |
$1,000 GYD |
$34,100 GYD |
Land/River/Cutter head Dredge – 18 inches |
$1,000 GYD |
$1,000 GYD |
$43,400 GYD |
Front End Loader (SMFEL)
|
$1,000 GYD |
|
$1,000 GYD |
Hydraulic Excavator (SMHE) |
$1,000 GYD |
|
$1,000 GYD |
Hammer Mill (H-2, H-3, etc.) (SMHM) |
$1,000 GYD |
|
$1,000 GYD |
JAW Crusher (SMJC) |
$1,000 GYD |
|
$1,000 GYD |
Wash Plant (SMWP) |
$1,000 GYD |
|
$1,000 GYD |
Bulldozer (SMBLD) |
$1,000 GYD |
|
$1,000 GYD |
Rod Mill (SMRM) |
$1,000 GYD |
|
$1,000 GYD |
Metal Detector (SMMD) |
$1,000 GYD |
|
$1,000 GYD |
Truck (SMTR) |
$1,000 GYD |
|
$1,000 GYD |
Articulated Truck (SMAT) |
$1,000 GYD |
|
$1,000 GYD |
Drill (SMDR) |
$1,000 GYD |
|
$1,000 GYD |
Centrifugal Concentrator (SMCF) |
$1,000 GYD |
|
$1,000 GYD |
Screen (vibratory or rotary) (SMSC) |
$1,000 GYD |
|
$1,000 GYD |
Forklift (SMFL) |
$1,000 GYD |
|
$1,000 GYD |
Crane (SMCR) |
$1,000 GYD |
|
$1,000 GYD |
Shaking Table (SMST) |
$1,000 GYD |
|
$1,000 GYD |
Jig (SMJG) |
$1,000 GYD |
|
$1,000 GYD |
Impact Mill (SMIM) |
$1,000 GYD |
|
$1,000 GYD |
Tractor (SMTRT) |
$1,000 GYD |
|
$1,000 GYD |
Grader (SMGD) |
$1,000 GYD |
|
$1,000 GYD |